аренда Aston Martin AMV8 Volante

Following the unveiling of the AMV8 Vantage concept car in 2003, the production V8 Vantage was introduced at the Geneva Motor Show in 2005 for the 2006 model year. The two seat, two -door coupé had a bonded aluminium structure for strength and lightness. The 172.5 inch (4.38 m) long coupé featured a hatchback-style tailgate for practicality, with a large luggage shelf behind the seats. In addition to the coupé, a convertible, known as the V8 Vantage Roadster, is available .[1] The V8 Vantage was initially powered by a 4.3 L (4300 cc) quad-cam 32-valve V8 which produced 380 hp (280 kW) at 7,300 rpm and 302 lb·ft (409 N·m) at 5,000 rpm. However models produced after 2008 had a 4.7 litre 420 hp (313 kW) V8.[2] Though based loosely on Jaguar's AJ-V8 engine architecture, this engine was unique to Aston Martin and featured race-style dry-sump lubrication, which enabled it to be mounted low in the chassis for an improved center of gravity. The cylinder block and heads, crankshaft, connecting rods, pistons, camshafts, inlet and exhaust manifolds, lubrication system, and engine management were all Aston Martin designs and the V8 engine was assembled by hand at the AM facility in Cologne, Germany, which also built the V12 engine for the DB9 and Vanquish. The engine was front mid-mounted with a rear-mounted transaxle, giving a 49/51 front/rear weight distribution. Slotted Brembo brakes were also standard. The original V8 Vantage could accelerate to 60 mph (97 km/h) in 4.7 seconds topping out at 175 mph (282 km/h).[3] Vantages with the enhanced 400 HP version of the 4.3 L V8 engine (included with the "N400" package or available individually as a Power Upgrade kit) as well as later models with the 4.7 L V8 and 6.0 L V12 were even faster. In 2008 Aston introduced an aftermarket dealer approved upgrade path for power and handling of the 4.3L variants that maintained the warranty with Aston. The power upgrade was The V8 Vantage Power Upgrade, creating a more potent version of the Aston Martin 4.3 litre engine with an increase in Peak power of 20 bhp to 400 bhp while peak torque is increased by 10Nm to 420Nm. This consists of the fitting of the following revised components; manifold assembly (painted Crackle Black), valved air box, right and left hand side vacuum hose assemblies, engine bay fuse box link lead (ECU to fuse box), throttle body to manifold gasket, intake manifold gasket, fuel injector to manifold seal, and a manifold badge.